The WorkSafe website will be unavailable on Tuesday 16 September from 12pm–5pm due to planned maintenance.
Our other online services, including the online services portal(external link) and Energy Safety portal(external link), will remain available.
To notify us of an injury, illness or incident at work, visit our online services portal(external link). For urgent notifications, please call us on 0800 030 040. For general or non-urgent enquiries, email us at info@worksafe.govt.nz.
This is the Health and Safety at Work (Hazardous Substances—Thermoplastic Stationary Tanks) Safe Work Instrument 2017.
In this safe work instrument—
- clauses 6 to 9 specify requirements relating to design and construction of a tank for the purposes of regulation 17.6(1)(k) of the Regulations:
- clause 10 specifies requirements for the marking of a tank for the purposes of regulation 17.76(1)(b)(ii) of the Regulations:
- clause 11 sets out additional requirements that apply to the installation of a tank and states which PCBUs are required to comply with those additional requirements for the purposes of regulation 17.105 of the Regulations:
- clause 12 sets out additional requirements that apply to the operation of a tank and states which PCBUs are required to comply with those additional requirements for the purposes of regulation 17.105 of the Regulations:
- clause 13 specifies the maximum period of validity for which a compliance certificate for a tank may be issued for the purposes of regulation 17.92(1)(a)(i)(E) of the Regulations.
Thermoplastic stationary tanks
Last updated