;

This is the Health and Safety at Work (Hazardous Substances—Design and Construction of Above Ground Stationary Tank to ULC-ORD-C80.1-2000) Safe Work Instrument 2017.

In this safe work instrument,—

  1. clauses 6 to 9 set requirements for the design and construction of a tank for the purposes of regulation 17.6(1)(k) of the Regulations:
  2. clause 10 sets requirements for venting of a tank for the purposes of regulation 17.7(3)(c) of the Regulations:
  3. clause 11 sets requirements for the design, construction, and installation of a liquid level indicator for the purposes of regulation 17.12(3) of the regulations:
  4. clause 12 sets requirements for marking of a tank for the purposes of regulation 17.76(1)(b)(ii) of the Regulations:
  5. clause 13 sets out additional requirements that apply to the installation of a tank and states which PCBUs are required to comply with those requirements for the purposes of regulation 17.105 of the Regulations:
  6. clause 14 sets out additional requirements that apply to the operation of a tank and states which PCBUs are required to comply with those requirements for the purposes of regulation 17.105 of the Regulations.
PDF
Design and construction of above ground stationary tank to ULC-ORD-C80.1-2000 (PDF 80 KB)

Material incorporated by reference 

The Health and Safety at Work (Hazardous Substances—Design and Construction of Above Ground Stationary Tank to ULC-ORD-C80.1-2000) Safe Work Instrument 2017 incorporates material by reference.

Accessing incorporated material 

The standards incorporated by reference in the safe work instrument are subject to copyright and can be purchased from their publishers or viewed at WorkSafe New Zealand.

A list of the standards and their publishers can be found in the Gazette notice:

PDF
New Zealand Gazette: Material Incorporated by Reference in the 2017 Hazardous Substances Safe Work Instruments (PDF 58 KB)

Viewing incorporated material at WorkSafe

The location of the WorkSafe New Zealand office has changed since the Gazette notice was published.

The standards are available for inspection, at no charge, between 9.00am and 5.00pm from Monday to Friday (excluding statutory holidays) at WorkSafe New Zealand, located at 8 Willis Street, Wellington 6011.

To arrange a time to view the standards, email WorkSafe at regulatory.frameworks@worksafe.govt.nz