The WorkSafe website will be unavailable on Tuesday 16 September from 12pm–5pm due to planned maintenance.
Our other online services, including the online services portal(external link) and Energy Safety portal(external link), will remain available.
To notify us of an injury, illness or incident at work, visit our online services portal(external link). For urgent notifications, please call us on 0800 030 040. For general or non-urgent enquiries, email us at info@worksafe.govt.nz.
This is the Health and Safety at Work (Hazardous Substances—Above Ground Rotationally-Moulded Polyethylene Stationary Tanks) Safe Work Instrument 2017
In this safe work instrument—
- clauses 6(1), 7 to 12, 14 to 16, 19 and 21 set requirements for the design and construction of a tank for the purposes of regulation 17.6(1)(k) of the Regulations:
- clause 13 sets requirements for the design, construction, and installation of a liquid level indicator for the purposes of regulation 17.12(3) of the Regulations:
- clause 20 sets requirements for marking of a tank for the purposes of regulation 17.76(1)(b)(ii) of the Regulations:
- clauses 17, 18, 22, 23, and 26 set out additional requirements that apply to the testing of a tank and states which PCBUs are required to comply with those requirements for the purposes of regulation 17.105 of the Regulations:
- clause 6(2), and clauses 24 and 25 set out additional requirements that apply to the installation of a tank and state which PCBUs are required to comply with those requirements for the purposes of regulation 17.105 of the Regulations:
- clauses 27 to 29 set out additional requirements that apply to the operation of a tank and states which PCBUs are required to comply with those requirements for the purposes of regulation 17.105 of the Regulations:
- clause 30 sets out additional requirements that apply to the inspection of a tank and state which PCBUs are required to comply with those requirements for the purposes of regulation 17.105 of the Regulations:
- clause 31 specifies the maximum period of validity for which a compliance certificate for a tank may be issued for the purposes of regulation 17.92(1)(a)(i)(E) of the Regulations.
Above ground rotationally-moulded polyethylene stationary tanks
Last updated