We are operating at reduced capacity due to COVID-19 Alert Level Three restrictions. Please only call our 0800 number if someone is at serious risk of harm or has been seriously injured, become seriously ill, or died as a result of work.
For other notifications please complete our online forms at Notify WorkSafe.
Court Summary - at a glance
- Ensure the freight cage complied with relevant industry standards and guidance.
- Ensure only trained, competent and authorised workers use the freight cage and operate the forklift.
- Ensure the safe work method for using a freight cage is adequately communicated to workers using the freight cage.
The victim attempted to put the forklift forks into the freight cage’s pockets but was not successful so moved the forks inwards and put them on the inside of each pocket. The victim was not aware a chain needed to be attached to the mast of the forklift to prevent the cage sliding off the forks and there was no signage fitted to the cage explaining how to safely use it.
The victim got into the freight cage and asked his supervisor to lift him up. However, instead the Defendant allowed a truck driver, who did not have a forklift license and was not authorised to operate a forklift, to lift the victim.
The freight cage was lifted around 3m off the ground before it tipped and slid off the forklift forks onto the ground below.
This was the Defendant’s third incident involving freight cages falling from forklift forks while being used to lift workers.
The victim suffered a serious back injury.